AutoCenter

Enables automatic centering of the component within its boundary. Default is 1 - Yes. If set to 0 - No, the component is aligned left in the boundary. OffsetX and OffsetY can be used to move the placement of the component in the boundary.

AutoFrameRate

Enables the object to control its update rate. Default is 0 - No. When set to 1 - Yes, the object is repainted at the rate specified by the UpdateFrameRate property.

AutoScaleDesiredTicks

Specifies the desired TickMajorCount when AutoScaleEnabled is set to 1 - Yes. Default is 5. Due to the algorithm used to calculate the tick counts, the actual count can vary.

AutoScaleEnabled

Enables auto scaling of the indicator. Default is 0 - No.

AutoScaleMaxTicks

Specifies the maximum TickMajorCount when AutoScaleEnabled is set to 1 - Yes. Due to the algorithm used to calculate the tick counts, the actual count can vary. Default is 6.

AutoScaleStyle

Specifies the style for adjusting the PositionMin and PositionMax when AutoScale is enabled. Option is either 0 - iassAutoMinMax or 1 - iassFixMinMax. Default is 0 - iassAutoMinMax.

BackGroundColor

Specifies the color of the object background. Default is gray (RGB 236.233.216). The background color is not shown if the Transparent property is set to 1 — Yes.

BackGroundPicture

Specifies the name of an image file to show on the background of the object. Default is blank.

BorderStyle

Specifies the border style of the object. Default is 0 - ibsNone. Other options are 1 - ibsRaised and 2 - ibsLowered.

CurrentMax

Specifies the maximum value reached by the Position property. It is reset each time the Position value is greater than the CurrentMax value. The only way to access the value is programmatically (i.e., using script).

CurrentMin

Specifies the minimum value reached by the Position property. It is reset each time the Position value is less than the CurrentMin value. The only way to access the value is programmatically (i.e., using script).

Enabled

Enables user interaction with the object. If set to 0 - No, the object is still shown but its context menu is disabled. Default is 1 - Yes.

EndsMargin

Specifies the margin (in pixels) between the indicator ends and the object boundary. Default is 10.

Height

Specifies (in pixels) the height of the object.

KeyArrowStepSize

Specifies the increment applied to the slider position when the arrow keys are pressed. Default is 1.

KeyPageStepSize

Specifies the increment applied to the slider position when the Page Up or Page Down keys are pressed. Default is 10.

MinMaxFixed

Not applicable for this tool. Specifies whether the minimum and maximum pointers are fixed or will track the range of the Position property. Default is 0 - No.

MouseControlStyle

Specifies how the pointer responds to a mouse click in the track. Default is 0 - ismcsSlideOnly. This option requires the user to slide the pointer to a new location. 1 - ismcsSlidePage allows the user to click in the track. The pointer will move in the direction of the click by the increment specified by the KeyPageStepSize property. 2 - ismcsGoto also allows the user to click in the track and the pointer is moved to the location of the click.

MouseWheelStepSize

Specifies the adjustment to the slider position when the mouse wheel is moved one increment. Default is 1.

OffsetX

Specifies the offset of the object from its x-axis. Default is 0.

OffsetY

Specifies the offset of the object from its y-axis. Default is 0.

OptionSaveAllProperties

Enables the SaveAllPropertiesToFile method to save just the ActiveX Properties or all object properties. Default is 0 - No, which means that only ActiveX Properties are saved.

Orientation

Specifies the orientation of the indicator. The default is 0-ioVertical.

OrientationTickMarks

Specifies the location of the tick marks in relation to the indicator. If the object orientation is vertical, the option is the left or right side. If it is horizontal, the option is top or bottom. Default is 0 - iosBottomRight.

PointerBitmap

Specifies the bitmap to be shown in place of the pointer. The PointerStyle property must be set to Bitmap. For best results, match the background color of the bitmap to the color of the track.

PointerHeight

Specifies (in pixels) the height of the pointer. Default is 10.

PointerIndicatorActiveColor

Specifies the color of the pointer when it is being moved. Default is red (RGB 255.0.0). The color is shown only if the PointerStyle property is set to LED, Light Bar, or Bar Color.

PointerIndicatorInactiveColor

Specifies the color of the pointer when it is idle. Default is black (RGB 0.0.0). The color is shown only if the PointerStyle property is set to LED, Light Bar, or Bar Color.

PointerStyle

Specifies the appearance of the pointer indicator. Default is 0 - ispsLed. Other options are 1 - ispsPointer, 2 - ispsBar, 3 - ispsLightBar, 4 - ispsBarColor, and 5 - ispsBitmap.

PointerWidth

Specifies the width (in pixels) of the pointer indicator. Default is 15.

Position

Specifies the starting position of the pointer. Default is 0. In Run mode the position is determined by the point associated with the object.

PositionMax

Specifies the upper limit of the indicator level. Default is 100.

PositionMin

Specifies the lower limit of the indicator level. Default is 0.

PositionPercent

Specifies the level of the indicator in terms of percent in regards to the range (PositionMax and PositionMin). This value is calculated. Default is 0. Valid range is 0.00 (0%) and 1.00 (100%). The only way to access the value is programmatically (i.e., using script).

PrecisionStyle

Specifies if the labels show significant digits (integers) or decimal places. Default is 1 - ipsFixedDecimal Points, which enables the labels to show the number of decimal places specified by the TickLabelPrecision property.

ReverseScale

Enables reversing the scale. Normal scaling runs negative to positive left to right or bottom to top. Default is 0 - No.

ShowFocusRect

Enables display of the focus rectangle.

ShowTickLabels

Enables display of the tick mark labels. Default is 1 - Yes.

ShowTicksMajor

Enables display of the major tick marks. Default is 1 - Yes.

ShowTicksMinor

Enables display of the minor tick marks. Default is 1 - Yes.

TickLabelFont

Specifies the font for the tick labels. Default is MS Sans Serif (8 point).

TickLabelFontColor

Specifies the color of the tick mark labels. Default is black (RGB 0.0.0).

TickLabelMargin

Specifies the size of the margin (in pixels) between the labels and the tick marks. Default is 5.

TickLabelPrecision

Specifies the number of decimal places for the tick labels. Default is 0. To use any value other than 0, TickLabelPrecison must be set to 1 - ipsFixedDecimal Points.

TickMajorColor

Specifies the color of the major tick marks. Default is black (RGB 0.0.0).

TickMajorCount

Specifies the number of major tick marks displayed on the scale span. Default is 5.

TickMajorLength

Specifies the length (in pixels) of the major tick marks. Default is 7.

TickMajorStyle

Specifies the style of the major tick marks. Default is 2 - ibsLowered. Other options are 0 - ibsNone and 1 - ibsRaised.

TickMargin

Specifies the size of the margin (in pixels) between the tip of the pointer and the tick marks. Default is 5.

TickMinorAlignment

Specifies the alignment of the minor tick marks in relation to the major tick marks. Default is 0 - itmnaInside. Other options are 1 - itmnaCenter and 2 - itmnaOutside.

TickMinorColor

Specifies the number of minor tick marks displayed between major tick marks. Default is 4.

TickMinorCount

Specifies the number of minor tick marks displayed on the scale span. Default is 4.

TickMinorLength

Specifies the length (in pixels) of the minor tick marks. Default is 3.

TickMinorStyle

Specifies the style of the minor tick marks. Default is 0 - ibsNone. Other options are 1 - ibsRaised and 2 - ibsLowered.

TrackColor

Specifies the color of the track. Default is white (RGB 255.255.255).

TrackStyle

Specifies the track style. Default is 0 - istsBox. Other options are 0 - istsBox, 1 - istsLine, 2 - istsBevelLowered, 3 - istsBevelRaised.

Transparent

Enables transparency of the object background. Default is 0 - No.

UpdateFrameRate

Specifies the rate (in seconds) of repainting the object. Default is 60. Applicable only when AutoFrameRate is set to 1 - Yes.

Visible

Enables the visibility of the object on TheView. Default is 1 - Yes.

Width

Specifies the width (in pixels) of the object.